Ruth Franklin's Artistic Touch
Chain Stitch (Bonnaz) Embroidery Publications

The Bonnaz Machine Mechanic's Manual

Repairs, adjustments, face assembly instructions and parts lists for Singer and Cornely chain stitch (Bonnaz) machines.

The Bonnaz Machine Mechanic’s Manual is the fifth book in the Artistic Touch School of Embroidery series. Its 199 pages bring together the repair instructions and parts lists that would not fit in Ruth’s other books. Ruth wrote it for operators and for industrial sewing machine mechanics, whom she says mostly “stay as far away from the Universal (Feed) Movement Machines as they can get.”

Her advice to mechanics on the very first page is simple: learn to operate the machine at least well enough to write your name. In her forty-five years in the embroidery business, she found only three mechanics who had bothered to do so, and they were the ones with a real knack for adjusting these machines.

This book covers:

  • Weekly Machine Maintenance Maintenance instruction including: oil points and needlebar/nipple/looper cleanout.

  • Face Assembly, Step by Step: Since “99% of all problems connected with chain stitch machines are connected with the FACE ASSEMBLY,” Ruth walks through taking apart and reassembling the face of the Singer 114W103, then fine-tuning the nipple and presser foot until the machine will sew on a single piece of fabric without picking or marking it. (Ruth demonstrates the same steps on Artistic Touch Video Number Five, found below.)

  • Do’s & Don’ts: Ruth’s hard and fast rules, starting with “if it ain’t broke - DON’T fix it!” and never forcing a part that doesn’t want to fit.

  • The Cornely Universal Embroidery Machine Instructions: Original operating instructions for the treadle, hand-stop motion and double treadle.

  • The Singer 114W120 Instruction Manual: A reprint of the original Singer manual for the Three-Thread Cording machine, with Ruth’s notes on cording, braiding, gimp and moss stitching.

  • The Cornely Universal Embroidery Machine Instructions: Original operating instructions for the treadle, hand-stop motion and double treadle.

  • Machine History & Identification: A list of Cornely machine models and what each one does, and why your “Columbia” chain stitch machine is actually a Cornely.

  • Parts Lists: Singer and Cornely part numbers side by side for the face assembly, plus full parts lists and diagrams for the Cornely A3, L3 / LG3, antique L, LT & LTG, and Type 121 machines.

  • Motors & Clutches: Setting up separate-clutch and clutch motors, lining up the belts, and fixing a treadle that either takes off “like a bat out of hell” or has to be stomped on.

  • Vintage Advertisements: Machine and supply ads from the 1930s and 1940s, including Columbia, Singer, Cornely, and Lintz & Eckhardt.

For more on the specialty machines, see Cording, Braid & Special Machines.

The Bonnaz Machines Mechanic’s Manual open to its introduction beside a Singer chain stitch machine

Repairs-Maintenance & Adjustments for Chain Stitch Machines

Ruth also included a companion VHS recording instructing students during a complete tear down of a Singer 114w103 face. She also gives instructions on basic maintenance of the machine.


Page / …
Loading…